CPU Arctic Freezer 36 (Black)

High-Class Finish with Aluminium Top Plate
With its push-pull configuration, the Freezer 36 not only impresses with its efficient cooling performance, but also with its design. The soldered ends of the heatpipes are concealed by the screwed aluminium cover, allowing it to blend seamlessly into any PC setup and highlight both performance and appearance.

Improved Fan Mounting
Thanks to the innovative mounting system, booth fans are effortlessly mounted in the heatsink using a click system. This mounting method eliminates the need for fan clips, making it easier to install the cooler or replace the fans, even if the cooler is already installed. The Freezer 36 is therefore compatible with most 120 mm fans.

High-Quality Bearing
Thanks to a combination of alloy and lubricant developed in Germany, friction within the bearing is minimised and greater efficiency is achieved. In addition to preventing lubricant loss, wear on the pin and sleeve is also minimised. In this way, less heat is generated, less bearing noise is produced and the service life of the fan is significantly extended.

Specifications:
Compatibillity:
Intel: LGA1851 | LGA1700
AMD: AM5 | AM4
PI | NNPI: 245 | 219
TIM: MX-6 (0.8 g)
Operating Ambient Temperature: 0—40 °C
Heatsink:
Heatpipes: 4x 6 mm, Copper
Fin Stack: 59x 0.4 mm, Aluminium
Fans:
Fan: 2x P12 PWM PST
Speed: 200 – 2000 rpm, PWM Controlled (0 rpm below 5 % PWM)
Bearing: Fluid Dynamic Bearing
Current | Voltage: 0.11 A | 12 V DC
Cable Lenght: 200 mm + 80 mm Splitter Cable
Connector: 4-Pin PWM-Connector + 4-Pin Plug
Current | Voltage: 0.40 A | 5 V DC
Cable Lenght: 200 mm + 80 mm Splitter Cable
Connector: 3-Pin A-RGB-Connector + 3-Pin Plug